Stainless Steel Flange
Glen Flange Co.,Ltd. have the ability to supply special grades of stainless steel and U-shaped stainless steel pipes. Our products come with all certificates of origin and quality. As one of the leaders in trading with metals for more than 10 years, we work with many companies from China and abroad. The most important thing for us is to complete the high requirements of our clients.
Stainless steel is also known as stainless steel (inoxydable), means a steel alloy with a minimum content of 11% Cr by mass. Because of its corrosion resistant and have a wide variety of usage. We carry a variety of threaded flanges, weld neck flanges, slip-on flange, socket welding flange and blind flanges are among the selection.
Features:
· Corrosion resistance finish
· Robust construction
· Dimensional accuracy
Materials:
F301;F304;F304L;F310S;F316;F31L;F316Ti;F317;F321;F347;
Standard:
· ASME/ANSI B 16.5
· ANSI 16.47 Series A&B
· AS2129
· DIN2527~DIN2637
· EN1092-1
· GB/T9113~GB/T9123-2000
Manufacturing procedure:
Quality Control and Test :
Before producing and mid-producing, we strictly control the quality in assurance of each step. Our QC inspector check all items piece by piece to recheck the quality if according to client request. try to reduce the defect rate to the greatest extent by process control and result control. Our commitment to quality is recognized worldwide. Our employees and staff perform to the highest standard of quality and excellence whilst maintaining the constant and full satisfaction of our customers when ordering services and products, even those with the most demanding requirements.
The Glen Flange is certified to the quality standard ISO 9001:2008 and PED (Pressure Equipment Directive AD WO) and we are approved by many end-users worldwide. Besides, for all certifications, third-party witnessing and endorsement are available.
Chemical Composition ( IN PERCENTAGE )
Stainless Steel
Grade | C (Max) |
Mn (Max) |
P (Max) |
S (Max) |
Si (Max) |
Cr |
Ni |
Mo |
Nitrogen (Max) |
Cu/ Others |
301 |
0.15 |
2.00 |
0.045 |
0.030 |
1.00 |
16.00 – 18.00 |
6.00 – 8.00 |
- |
0.10 |
- |
304 |
0.08 |
2.00 |
0.045 |
0.030 |
0.75 |
18.00 – 20.00 |
8.00- 10.50 |
- |
0.10 |
- |
304L |
0.030 |
2.00 |
0.045 |
0.030 |
0.75 |
18.00 – 20.00 |
8.00- 12.00 |
- |
0.10 |
- |
310S |
0.08 |
2.00 |
0.045 |
0.030 |
1.50 |
24.00- 26.00 |
19.00 – 22.00 |
- |
- |
- |
316 |
0.08 |
2.00 |
0.045 |
0.030 |
0.75 |
16.00 – 18.00 |
10.00 – 14.00 |
2.00 – 3.00 |
0.10 |
- |
316L |
0.030 |
2.00 |
0.045 |
0.030 |
0.75 |
16.00 – 18.00 |
10.00 – 14.00 |
2.00 – 3.00 |
0.10 |
- |
317 |
0.08 |
2.00 |
0.045 |
0.030 |
0.75 |
18.00 – 20.00 |
11.00 – 14.00 |
3.00 – 4.00 |
0.10 |
- |
317L |
0.030 |
2.00 |
0.045 |
0.030 |
0.75 |
18.00 – 20.00 |
11.00 – 15.00 |
3.00 – 4.00 |
0.10 |
- |
321 |
0.08 |
2.00 |
0.045 |
0.030 |
0.75 |
17.00 – 19.00 |
9.00 – 12.00 |
- |
0.10 |
Ti5 ( C + N ) Min or 0.70 max |
347 |
0.08 |
2.00 |
0.045 |
0.030 |
0.75 |
17.00 – 19.00 |
9.00 – 13.00 |
- |
- |
Cb= 10x ( C Min ) or 1.00 Max |
409 |
0.08 |
1.00 |
0.040 |
0.010 |
1.00 |
10.50 – 11.75 |
0.50 |
- |
- |
Ti= 6x (C+ N ) Min or 0.70 Max |
409M |
0.03 |
0.81.2 |
0.030 |
0.030 |
0.40.75 |
11.00- 12.00 |
1.5 max. |
- |
- |
Ti= 6x (C) Min or 0.70 Max |
410S |
0.08 |
1.00 |
0.040 |
0.030 |
1.00 |
11.50- 13.50 |
0.60 |
- |
- |
- |
410 |
0.15 |
1.00 |
0.040 |
0.030 |
1.00 |
11.50- 13.50 |
0.75 |
- |
- |
- |
420 |
0.35 |
0.50 |
0.035 |
0.015 |
0.50 |
12.00 – 13.00 |
0.20.3 |
- |
- |
- |
430 |
0.12 |
1.00 |
0.040 |
0.030 |
1.00 |
16.00 – 18.00 |
0.75 |
- |
- |
- |
JSL AUS |
0.08 |
7.08.0 |
0.070 |
0.030 |
0.75 |
15.50 – 16.50 |
4.25 – 4.75 |
- |
- |
0.9 – 1.10 |
JS- 203 |
0.08 |
9.2510.25 |
0.070 |
0.030 |
0.75 |
14.25 – 15.25 |
2.25 – 2.75 |
- |
- |
1.60- 2.0 |
301M |
0.10 |
4.55.5 |
0.060 |
0.030 |
0.75 |
14.50 – 15.50 |
6.0 – 7.0 |
- |
- |
1.70- 1.90 |
* Thickness of 1.27mm & below will have elongation of 20% min. |